Metal Detector Fortune M3 PL Large Display Waterproof coil. Depth of search 2m

Description

Metal detector Fortuna M3 (PL2943 case) up to 2 meters. Fortunе M3 PL
Fortuna M3 with PL2943 housing with large 7 × 4 display Winstar is a selective IB metal detector with metal detection, operating on the principle of induction balance.
Discrimination of metals - numerical and bar display of VDI, as in more expensive devices, for example MINELAB, FISHER, XP Metal Detectors, GARRETT (different objects and metal alloys have their own digital value).
The device is multi-frequency, with it you can use different coils with different frequencies.
The ability to disguise, exclude unwanted metal from the search. For example, exclude iron.
Specifications:
Discrimination: VDI number (VDI), sinograph.
Target voiceover: 90-tones, 4-tones, two-tones.
Ground balance: manual, automatic.
Ferrite tuning: automatic.
Sensor balance drift compensation: automatic.
Display backlight.
Winstar 7 × 4 display.
The latest firmware available.
Masks. The ability to mask unwanted metal.
Several search algorithms.
Pinpointer.
Tuning the device to the frequency of the existing sensor.
Possibility of connecting a search sensor: 5-20 kHz.
DD sensor 30x32 cm.
PL2943WH case (dimensions): 140 × 100 × 30 mm.
PL2943WH - thin waterproof instrument case made of impact-resistant heat-resistant UL-94V0 ABS plastic. Provides protection against ingress of dust and moisture according to IP65 standard.
The main characteristics of this assembly:
- lithium-ion battery 2200 (real capacity) mAh 3.7V;
- collapsible, adjustable rod, lower part - impact-resistant plastic, upper part - high-strength aluminum, coated with factory powder paint;
- high-quality board, factory-made, double-sided with a protective mask and metallized holes.
Nutrition:
1. Fully equipped, the unit is powered by 3.7 V (18650 lithium battery 2200 mAh).
2. If the power supply will be made of its own, then it is possible from 2 to 12 V.
3. Power connector for 5.5x2.1 mm plug.
4. The pinout of the sensor connector is as follows:
1 - RX +
2 - RX -
3 - screen
4 - TX +
5 - TX -
5. Sensor frequency: 7.2 kHz (default).
6. Spacing between TX-RX: 1.7-1.8 kHz.
Detection range of the Fortuna M3 / Fortune M3 metal detector by air:
DD 320x300 mm 7 kHz / current 86 mA / frequency separation 1.8 kHz / sens 6.
5 kopecks USSR 1981: 41 cm;
3 kopecks 1910: 37 cm.
average detection range by air = 32-57 cm per coins;
large metal objects up to 150-200 cm.
Contents of delivery:
Dismountable bar.
Charger.
Sensor.
Battery.
Functional block of the device.
Instruction.
Battery;
Charger;
Instruction.